626 milling machine converted to CNC
#1
Hi Lads

I am in the process of converting my 626 milling machine to CNC Big Grin
[Image: normal_P1020084.JPG]

Work done so far ,, http://madmodder.net/index.php?topic=6037.0

Picked up a couple of 8mm pitch/20mm timing pulley's tother day for the Z axis .
[Image: normal_P1040930.jpg]

Part machined up the mounting block for the Y axis nut to see how much room i had left to fit the Z lead screw pulley .
[Image: normal_P1040919.jpg]
[Image: normal_P1040920.jpg]
mmmmmmm there is no room to fit the pulley SlapheadRotflRotflRotflRotflRotflRotflRotfl
[Image: normal_P1040927.jpg]
[Image: normal_P1040928.jpg]
I can turn the nut 90 deg that would give me another 7 mm to play with . Wont look as nice Slaphead
[Image: normal_P1040929.jpg]
I was never impressed with the section of casting that houses the Z axis bearings , and there was not allot i could do with it as it is to fit the new bearings ect ,,,,,,,,,,,,,,,,, so i removed the offending lump Popcorn
[Image: normal_P1040924.jpg]
No going back RotflRotflRotflRotflRotflRotfl
[Image: normal_P1040931.jpg]
[Image: normal_P1040933.jpg]

Rob
Reply
Thanks given by:


Messages In This Thread
626 milling machine converted to CNC - by RobWilson - 06-05-2012, 04:27 PM
RE: 626 milling machine converted to CNC - by EdK - 06-05-2012, 04:31 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-06-2012, 12:49 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-06-2012, 01:45 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-06-2012, 05:04 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-08-2012, 01:51 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-09-2012, 02:15 PM
RE: 626 milling machine converted to CNC - by EdK - 06-09-2012, 03:52 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-10-2012, 02:19 PM
RE: 626 milling machine converted to CNC - by EdK - 06-10-2012, 05:38 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-15-2012, 04:58 PM
RE: 626 milling machine converted to CNC - by EdK - 06-15-2012, 05:03 PM
RE: 626 milling machine converted to CNC - by RobWilson - 06-17-2012, 10:04 AM
RE: 626 milling machine converted to CNC - by EdK - 06-17-2012, 10:59 AM
RE: 626 milling machine converted to CNC - by RobWilson - 06-17-2012, 04:04 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-02-2012, 03:12 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-03-2012, 03:36 PM
RE: 626 milling machine converted to CNC - by EdK - 07-03-2012, 03:49 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-03-2012, 04:05 PM
RE: 626 milling machine converted to CNC - by EdK - 07-03-2012, 04:20 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-03-2012, 04:27 PM
RE: 626 milling machine converted to CNC - by EdK - 07-03-2012, 04:32 PM
RE: 626 milling machine converted to CNC - by EdK - 07-03-2012, 05:53 PM
RE: 626 milling machine converted to CNC - by EdK - 07-03-2012, 06:03 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-06-2012, 10:34 AM
RE: 626 milling machine converted to CNC - by EdK - 07-06-2012, 10:38 AM
RE: 626 milling machine converted to CNC - by RobWilson - 07-06-2012, 10:45 AM
RE: 626 milling machine converted to CNC - by EdK - 07-06-2012, 10:50 AM
RE: 626 milling machine converted to CNC - by RobWilson - 07-06-2012, 11:00 AM
RE: 626 milling machine converted to CNC - by EdK - 07-06-2012, 02:46 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-06-2012, 04:04 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-07-2012, 12:14 PM
RE: 626 milling machine converted to CNC - by EdK - 07-07-2012, 12:59 PM
RE: 626 milling machine converted to CNC - by RobWilson - 07-07-2012, 01:01 PM



Users browsing this thread: 1 Guest(s)