10-01-2021, 04:23 AM
The division was done with the the dividing head. while I was making the disk made a video on how to set up and use the dividing head so you have that to come.
The motor is indeed from a car it is not generally realized that car and light aircraft ETC electrical systems are 14 volt only the battery is 12 volt also the motors are made to withstand abuse and overload ( Snow ETC ) I have run my motors at 20 volt dropping to 18 on full load for about 15 years now with no ill effects I also use them on the mill for the X & Z.
Brian.
The motor is indeed from a car it is not generally realized that car and light aircraft ETC electrical systems are 14 volt only the battery is 12 volt also the motors are made to withstand abuse and overload ( Snow ETC ) I have run my motors at 20 volt dropping to 18 on full load for about 15 years now with no ill effects I also use them on the mill for the X & Z.
Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com
http://briansworkshop.weebly.com