09-09-2012, 10:44 AM
My Logan has a spring to hold the clapper down but to be honest I've needed to remove it for clearance and never put it back on. Simple little setup. Found this photo of one on the web.
![[Image: 41.jpg]](http://i145.photobucket.com/albums/r204/Lost_Pup_Photos/Logan%207%20Shaper/41.jpg)
The washer against the clapper has one edge removed, you can turn it and swing the clapper up all the way.
Are you running the machine fast, mine sure never swings up, but as Dallen mentioned I tightened up the pivot. Reamed out the assembly with a tapered reamer then lightly reamed the clapper to give it a little clearance.
The washer against the clapper has one edge removed, you can turn it and swing the clapper up all the way.
Are you running the machine fast, mine sure never swings up, but as Dallen mentioned I tightened up the pivot. Reamed out the assembly with a tapered reamer then lightly reamed the clapper to give it a little clearance.
Free advice is worth exactly what you payed for it.
Greg
Greg