09-12-2012, 10:27 PM
(This post was last modified: 09-12-2012, 10:32 PM by henryarnold.)
I also own an import TIG welder. I bought it in 2006 and use it 3-4 times a year. Mine is a Mitec Super 160P. It's a 3 in1 machine. It can TIG weld steel and aluminum, stick weld, and it can plasma cut. I've used for all three except I'm not successful at welding aluminum.
I also started a Yahoo Group for these kinds of machines. If you are interested, there are manuals, photos, and repair hints. There are a few advantages for these machines. They are inexpensive, they weigh around 45 lbs., and they are mostly easy to use. The big disadvantage is that if they break, you have to ship it somewhere to get it repaired. Mine has never failed. I was also able to get torch parts at my local welding shop.
http://groups.yahoo.com/group/Chinese_TI...d=29921054
Henry Arnold
I also started a Yahoo Group for these kinds of machines. If you are interested, there are manuals, photos, and repair hints. There are a few advantages for these machines. They are inexpensive, they weigh around 45 lbs., and they are mostly easy to use. The big disadvantage is that if they break, you have to ship it somewhere to get it repaired. Mine has never failed. I was also able to get torch parts at my local welding shop.
http://groups.yahoo.com/group/Chinese_TI...d=29921054
Henry Arnold
henryarnold, proud to be a member of MetalworkingFun Forum since Apr 2012.