11-02-2012, 03:46 PM
I don't think adjusting the gib will do it. If you tighten the gib in the middle you won't move the table at the ends. If you loosen the gib so as to be smooth at the ends it'll be real sloppy in the middle.
I'd guess it's time to scrape the ends.
I'd guess it's time to scrape the ends.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.