A Boma
#31
Do everything she says and give her everything she wants.
Reply
Thanks given by:
#32
Found some Stainless steel at a reasonable price 30 x 3mm SS 304.
They don't have 316, so 304 will have to do.
Smiley-eatdrink004 
DaveH
Reply
Thanks given by:
#33
After you stick weld it, spot weld some fake rivets on it.
Reply
Thanks given by:
#34
(03-20-2015, 04:35 PM)Vinny Wrote: After you stick weld it, spot weld some fake rivets on it.

That is a nice idea Thumbsup  pity I don't have a spot welder.

Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#35
Gives a good reason to buy one!
Reply
Thanks given by:
#36
MY kids are after one too - we've agreed (so far) on an old washing machine drum and all-thread legs, free for the use of!
Rules are for the obedience of fools, and the guidance of wise men...
(Douglas Bader)
Reply
Thanks given by:
#37
Hit up some blacksmith channels on YouTube. You'd be surprised how easy hot riveting is if you can make a hot charcoal fire, have something resembling an anvil, a hammer, a punch for making holes, and some round bar stock for the rivets.

Of course, if you heat stainless that hot, it never be shiny without significant work.

I'm so relieved, BTW, after looking at the title, I thought it was going to be a political rant of some kind. :)
Reply
Thanks given by:
#38
(03-21-2015, 01:03 PM)Roadracer_Al Wrote: I'm so relieved, BTW, after looking at the title, I thought it was going to be a political rant of some kind.  :)

Rotfl
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#39
Cold riveting is easy, too. The jackshaft, motor mount, and throwout assembly on my Gingery lathe is all cold riveted together. Basically you need a hammer and something solid to buck it with. Get some rod, drill a hole to suit, cut the rod into rivet lengths and go at it.
Reply
Thanks given by:
#40
I have got the stainless, still to get some welding rods. May be I'll go tomorrow. Smile 
Haven't quite finalized the design but it is getting there Smile 
Smiley-eatdrink004 
DaveH
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)