Mower Rebuild
#1
As if I need another project.
Was given two John Deere F935 front mount mowers. The engine is pooched in the one, put a rod through the block. The other wouldn't start after sitting for the winter. Apparently there's 4 or 5 decks ranging from 5 to 6 foot wide and maybe a real head.
Going to tear the donor down and store the extra parts. The one with the roof will get a rebuild. The paint has pealed for some reason, will decide if it gets sanded or sand blasted.
Hauled them home today.
[Image: 8cu9JYQWnFq2aqlkLyAU1jVVOwss7YZpF7ON9T9p...47-h729-no]

[Image: 29cbirPvk2N1gj06aewCCB_tEtMsESrIa5XZe0IO...47-h729-no]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#2
(12-21-2017, 09:33 PM)f350ca Wrote: As if I need another project.

I understand.
Reply
Thanks given by:
#3
Ah the smell of diesel exhaust.
A buddy dropped over this aft and we got the engine running.
Lots of bleeding and oil down the intake to get some compression. Think someone used too much either and dried the cylinders out. Funny the final mix was my penetrating oil (ATF/ Acetone), as soon as it went down the intake she fired up.
[Image: wvDgGMaCnKVGNI5EqwxSlvSlIrq_W94scfRIkNZk...47-h729-no]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#4
The donor one kind of fell apart.
[Image: tlB6U0KmR8rbu_-RbE_ivriqyqBBud4DJM7U22L6...45-h634-no]

[Image: aQOQ51_6SQr5p0mOyTKsrH1DHbUjM-geCApoL5Lb...45-h634-no]
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#5
Yikes
Reply
Thanks given by:
#6
Shore up the suspension and frame and put a hemi in it!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#7
(12-28-2017, 05:19 PM)f350ca Wrote: The donor one kind of fell apart.

Yeah, that's what they all say. Big Grin

https://youtu.be/qBF6iZfguF0?t=12
Willie
Reply
Thanks given by:
#8
(12-28-2017, 10:11 PM)Highpower Wrote:
(12-28-2017, 05:19 PM)f350ca Wrote: The donor one kind of fell apart.

Yeah, that's what they all say.   Big Grin

https://youtu.be/qBF6iZfguF0?t=12

Oops!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#9
There is a snow blower available for this tractor but they seam to go for stupid prices. So think we're going to build one. The pto on the tractor runs at 2400 rpm so they reduce the speed to the blower, some use a gearbox others a chain drive, we'll go chain. Needed an angle box to run the auger, mentioned it to a friend, he had an old Gravely Snow Cannon attachment. Picked it up yesterday, looks like a good heavy box. Quite a lethal looking blower, Im sure it would pass OHAS requirements at a union shop.
[Image: DRMOcmMKs_Ukzccx14Haum_PawKFN88y1L9oJ0ZK...45-h634-no]

Neat design, the blower housing rotates left or  right to direct the snow.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by:
#10
What is this "snow" stuff that I keep hearing about on here?   

We just have sunshine and a clear blue sky Cool
Hunting American dentists since 2015.
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)