Minimal Clockmaking
#31
(12-10-2012, 03:32 AM)Brian Wrote: Hi Dave
It looks as tho when i finally write the instruction book I will have to add a appendix for those that have mills and dividing heads.
Even if its only to stop your little man crying!!!Smile
Brian.

Thumbsup Rotfl Thanks Brian
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#32
Hi david
Brain out of gear yesterday
Number of teeth is 32 / cm Not / in.
Just put it down to old age.

Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#33
And another one to make the pair.

   


Brian
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#34
Brian,
They look nice. Smiley-signs107Worthy
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#35
I can just hear the soft "click click " now of that clockworks.

Clocks always are a facinating mechanism.
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
#36
After a few days when its just been to cold to stand in the shop its back to making chips.
Now having got the indexing sorted and the cutter proven. its on with the 32 tooth reverse hour wheel.
Using the 80 tooth change wheel to index the mandrel. two adjacent teeth are cut, until the curves at the tip just touch. The vertical slide is then locked, and the remaining teeth cut at full depth.

   

   

   

Very happy with the result.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#37
was wondering where you got off tooBig GrinBig Grin

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#38
Great pics, thanks for posting this build.
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
Reply
Thanks given by:
#39
Cold? In Sicily? You have to realize Brian, the many of us are from the Midwest and Canada and your weather this time of year seems downright balmy. Sweat

Nice looking gear you've turned out though, despite the weather conditions.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#40
(12-21-2012, 01:51 AM)Brian Wrote: Now having got the indexing sorted and the cutter proven. its on with the 32 tooth reverse hour wheel.
Using the 80 tooth change wheel to index the mandrel. two adjacent teeth are cut, until the curves at the tip just touch.
Nope - lost again 17428
Smiley-eatdrink004
DaveH
Reply
Thanks given by:




Users browsing this thread: 3 Guest(s)