12-05-2012, 02:14 PM
Greg,
I was aware of the possibility of warping when I did it, so I kept an eye on things as I went, especially on the large flat areas. Lowering the pressure and maintaining a shallow angle with the gun helped keep things from getting out of hand. It took a long time though so I'm not sure I'd ever do it again. I've stripped other cars since and using sanding discs and a body grinder was a lot quicker.
Tom
I was aware of the possibility of warping when I did it, so I kept an eye on things as I went, especially on the large flat areas. Lowering the pressure and maintaining a shallow angle with the gun helped keep things from getting out of hand. It took a long time though so I'm not sure I'd ever do it again. I've stripped other cars since and using sanding discs and a body grinder was a lot quicker.
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)