01-25-2013, 09:58 AM
Claude;
The two outside cap screws are never overtightened. They keep just enough pressure on the gib to make a lite friction movement. The center set screw will bind without over pressure to bow the gib because of the lite screw pressure. The center set screw is what actually keeps the gib tight.
"Billy G"
The two outside cap screws are never overtightened. They keep just enough pressure on the gib to make a lite friction movement. The center set screw will bind without over pressure to bow the gib because of the lite screw pressure. The center set screw is what actually keeps the gib tight.
"Billy G"