01-31-2013, 11:48 PM
It's alive!
I got the motors mounted and hooked up the computer. I used the pendant to move each axis. It's smooth and quiet.
I still need to make a tray for the keyboard and mouse, then I'll try to configure the homing switches and run a simple shape. I should have it ready to go this weekend.
Still need to make an enclosure for the MachTach and find a good place for the 3-ton arbor press on the bench. I really need a bigger shop.
I got the motors mounted and hooked up the computer. I used the pendant to move each axis. It's smooth and quiet.
I still need to make a tray for the keyboard and mouse, then I'll try to configure the homing switches and run a simple shape. I should have it ready to go this weekend.
Still need to make an enclosure for the MachTach and find a good place for the 3-ton arbor press on the bench. I really need a bigger shop.
Mike
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.