Jet JMD 18 project
#11
(02-15-2013, 01:25 AM)f350ca Wrote: If its only 220 with no neutral going to the machine its not a good idea to power the light off one leg. You'd have to return on the ground wire. I've done it with 110/24 volt transformers to operate contactors but even that's a no no by code.

Greg is absolutely correct. Don't do it. It's not worth the risk.

Ed
Reply
Thanks given by:
#12
Monkers, I guess we can assume then that your power cord is only a 2 wire plus ground and not a 3 wire plus ground (the third wire being white/neutral)?
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#13
Ill have to look at the cord again but i think you are correct stevec
monkers, proud to be a member of MetalworkingFun since Nov 2012.
Reply
Thanks given by:
#14
   

You can download the owners manual here if you don't already have one.
Willie
Reply
Thanks given by:
#15
Thank you!!
monkers, proud to be a member of MetalworkingFun since Nov 2012.
Reply
Thanks given by:
#16
coming a long nicely
krv3000, proud to be a member of MetalworkingFun Forum since Feb 2012.
Reply
Thanks given by:
#17
thanks krv3000, I got the cross members welded in today, that the base bolts to, got the top plate sheared and I set it in place and drilled the mounting holes, gotta finish welding it tomorrow....
monkers, proud to be a member of MetalworkingFun since Nov 2012.
Reply
Thanks given by:
#18
got the top piece sheared, then rounded the edges drilled the holes and welded it on

[Image: 2013-02-18_11-34-26_252.jpg]
monkers, proud to be a member of MetalworkingFun since Nov 2012.
Reply
Thanks given by:
#19
ok, been a while, Ive been dealing with some nonsense with the ex-wife......on a side note, the legalities are done, anyone want to buy a four wheeler, snowmobile and enclosed trailer lol......
So, I got back to work on the stand in between all the other stuff, heres how it sits now. Still have to make the drawer, need more plywood first.

[Image: 2013-03-12_20-38-06_817.jpg]
[Image: 2013-03-12_20-37-47_788.jpg]
[Image: 2013-03-12_20-37-28_342.jpg]
monkers, proud to be a member of MetalworkingFun since Nov 2012.
Reply
Thanks given by:
#20
Monkers,
That does look nice Thumbsup Smiley-signs107
Smiley-eatdrink004
DaveH
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)