08-04-2013, 09:27 AM
My mistake, the mic is a Starrett #203-C, not #103-C.
The dia of the barrel is .476 and the pin hole is a snug fit for a #52 drill shank. The Starrett measures the drill shank at .0625
Pics here: http://s571.photobucket.com/user/chucket...03-C%20mic
Chuck
The dia of the barrel is .476 and the pin hole is a snug fit for a #52 drill shank. The Starrett measures the drill shank at .0625
Pics here: http://s571.photobucket.com/user/chucket...03-C%20mic
Chuck
Micromark 7x14 Lathe, X2 Mill , old Green 4x6 bandsaw
The difficult takes me a while, the impossible takes a little longer.
The difficult takes me a while, the impossible takes a little longer.