03-20-2012, 06:41 PM
Ed,
Those "dust shields" should give good access to the bearing as well. Just make sure though, you don't want the bearing left behind in the casing with no way to get it out.
If you have access to to bearing you can sometimes use a socket from a 'socket set' to miss the shaft and locate on the inner part of the bearing.
DaveH
Those "dust shields" should give good access to the bearing as well. Just make sure though, you don't want the bearing left behind in the casing with no way to get it out.
If you have access to to bearing you can sometimes use a socket from a 'socket set' to miss the shaft and locate on the inner part of the bearing.
DaveH