MetalworkingFun Forum › Machinery › Milling Machines v
Fixing a Leaky RF-45 Mill Head - Enco

Thread Modes
Fixing a Leaky RF-45 Mill Head - Enco
henryarnold Offline
Sophmore
***
Posts: 170
Threads: 9
Joined: Apr 2012
Location: Southern California
#165
05-12-2012, 12:47 PM
(05-12-2012, 11:37 AM)EdAK Wrote: The mill is just about ready to have the top reinstalled and then the quill with spindle. I've decided to paint the head as long as I had it stripped down. So today I'm applying bondo to the areas where the factory goop has fallen out. It won't look pretty but should look better than the factory job. I painted the top already and it turned out OK.

Ed

I didn't mention it but after I assembled the top and bottom of my head, the Permatex squeeze out was difficult to remove without getting it on the paint. I ended up cleaning it off with paint thinner and putting another coat of paint on the head. I taped off all of the openings and machined surfaces before painting it.

Henry
henryarnold, proud to be a member of MetalworkingFun Forum since Apr 2012.
Reply
Thanks given by:


Messages In This Thread
Fixing a Leaky RF-45 Mill Head - Enco - by EdK - 03-16-2012, 09:03 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-16-2012, 09:09 AM
RE: Fixing a Leaky RF-45 Mill Head - by stevec - 03-16-2012, 01:28 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-16-2012, 06:07 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-16-2012, 06:29 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-16-2012, 06:56 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-16-2012, 07:02 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-16-2012, 07:07 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-16-2012, 07:17 PM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 03-16-2012, 10:20 PM
RE: Fixing a Leaky RF-45 Mill Head - by stevec - 03-16-2012, 07:31 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 08:51 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-16-2012, 07:33 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 03-16-2012, 07:58 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-16-2012, 09:07 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 08:54 AM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-16-2012, 10:02 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 03-16-2012, 10:39 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 10:32 AM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-17-2012, 10:43 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 10:45 AM
RE: Fixing a Leaky RF-45 Mill Head - by arvidj - 03-17-2012, 11:13 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 11:18 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-17-2012, 11:04 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 11:14 AM
RE: Fixing a Leaky RF-45 Mill Head - by stevec - 03-17-2012, 11:06 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 11:21 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-17-2012, 11:12 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 11:43 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-17-2012, 11:51 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 12:22 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-17-2012, 11:57 AM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-17-2012, 03:51 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 04:17 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 04:21 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 04:58 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-17-2012, 05:05 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 06:17 PM
RE: Fixing a Leaky RF-45 Mill Head - by TOM REED - 03-17-2012, 08:39 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-17-2012, 08:45 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 03-18-2012, 12:27 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-18-2012, 02:17 PM
RE: Fixing a Leaky RF-45 Mill Head - by arvidj - 03-18-2012, 08:56 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-19-2012, 06:11 AM
RE: Fixing a Leaky RF-45 Mill Head - by arvidj - 03-19-2012, 03:38 PM
RE: Fixing a Leaky RF-45 Mill Head - by stevec - 03-18-2012, 06:09 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-18-2012, 06:17 PM
RE: Fixing a Leaky RF-45 Mill Head - by stevec - 03-18-2012, 06:44 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 03-18-2012, 09:29 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-19-2012, 04:36 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-20-2012, 06:13 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-20-2012, 06:24 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-20-2012, 06:33 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-20-2012, 06:41 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-20-2012, 06:44 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-21-2012, 06:11 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-21-2012, 04:21 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-21-2012, 05:21 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-21-2012, 06:01 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-21-2012, 06:33 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-21-2012, 07:14 PM
RE: Fixing a Leaky RF-45 Mill Head - by arvidj - 03-21-2012, 06:47 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-21-2012, 07:21 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-22-2012, 12:18 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-22-2012, 01:41 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-22-2012, 05:43 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-22-2012, 07:03 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-22-2012, 08:40 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 08:58 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 10:20 AM
RE: Fixing a Leaky RF-45 Mill Head - by TOM REED - 03-23-2012, 11:35 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 12:30 PM
RE: Fixing a Leaky RF-45 Mill Head - by TOM REED - 03-23-2012, 02:52 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-23-2012, 10:53 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 03:22 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 03:24 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-23-2012, 03:40 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 03:44 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-23-2012, 04:06 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 04:23 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 03-23-2012, 04:51 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-23-2012, 04:53 PM
RE: Fixing a Leaky RF-45 Mill Head - by PixMan - 03-23-2012, 05:35 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 05:47 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 03-23-2012, 06:15 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-23-2012, 07:46 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-30-2012, 05:28 PM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 03-30-2012, 10:58 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 03-31-2012, 01:20 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 03-31-2012, 09:01 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-02-2012, 06:13 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-04-2012, 03:54 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-05-2012, 07:04 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-05-2012, 05:37 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-05-2012, 05:54 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-05-2012, 06:04 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-04-2012, 04:15 PM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 04-05-2012, 09:10 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-06-2012, 06:37 AM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 04-06-2012, 07:33 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-09-2012, 05:49 PM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 04-09-2012, 07:38 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-27-2012, 08:13 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-28-2012, 11:25 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-28-2012, 04:16 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-28-2012, 07:48 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-28-2012, 08:32 PM
RE: Fixing a Leaky RF-45 Mill Head - by f350ca - 04-28-2012, 07:53 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-28-2012, 08:36 PM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 04-28-2012, 09:29 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 04-29-2012, 05:49 AM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 04-29-2012, 05:59 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-29-2012, 08:54 AM
RE: Fixing a Leaky RF-45 Mill Head - by f350ca - 04-29-2012, 10:35 AM
RE: Fixing a Leaky RF-45 Mill Head - by Highpower - 04-29-2012, 11:08 AM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 04-29-2012, 12:50 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-29-2012, 11:11 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-29-2012, 11:42 AM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-29-2012, 12:21 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 04-29-2012, 12:59 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-29-2012, 02:34 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-29-2012, 04:23 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-29-2012, 05:24 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 04-29-2012, 05:32 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 04-29-2012, 05:33 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-29-2012, 05:55 PM
RE: Fixing a Leaky RF-45 Mill Head - by f350ca - 04-29-2012, 08:47 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-30-2012, 08:26 AM
RE: Fixing a Leaky RF-45 Mill Head - by Mayhem - 04-30-2012, 12:33 AM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 04-30-2012, 08:41 AM
RE: Fixing a Leaky RF-45 Mill Head - by tlfamm - 05-02-2012, 12:14 PM
RE: Fixing a Leaky RF-45 Mill Head - by DaveH - 05-02-2012, 12:38 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 05-02-2012, 03:49 PM
RE: Fixing a Leaky RF-45 Mill Head - by ETC57 - 05-02-2012, 04:14 PM
RE: Fixing a Leaky RF-45 Mill Head - by EdK - 05-06-2012, 12:59 PM
RE: Fixing a Leaky RF-45 Mill Head - Enco - by henryarnold - 05-12-2012, 12:47 PM
RE: Fixing a Leaky RF-45 Mill Head - Enco - by November X-ray - 05-14-2012, 06:04 AM



Users browsing this thread: 1 Guest(s)