MetalworkingFun Forum › Machining › Projects v
church keys

Thread Modes
church keys
the artfull-codger Offline
Sophmore
***
Posts: 184
Threads: 21
Joined: Feb 2013
Location: north yorkshire n.e.england
The following 1 user Likes the artfull-codger's post:
oldgoaly (08-07-2013)
#1
08-07-2013, 04:37 PM
    Hi A couple of keys I was asked to make for our local church in the village,the stem was turned in the lathe,& the part for the bow was turned to a smaller diameter, then transfered to the mill & a slot milled out 3/4 of the depth of the stem for the 3/4"x1" x1/4" blank to fit in, & this was silver soldered in,then it was marked out & cut out with a piercing saw by hand then filed up with various needle files, the bow part was split down carefully with a junior hack saw,then heated to bright red & forged to shape with the join at the top welded together to form the bow,finally all polished up & a walk over the road to try them.[they worked!!!] These were made 2 yrs ago,I made some others anbut 20 yrs ago & they're still o-k, I suppose the original ones would be a forged blank but these have stood the test if time.
the artfull-codger, proud to be a member of MetalworkingFun Forum since Feb 2013.
Reply
Thanks given by:
doubleboost Offline
Super Moderator
******
Posts: 1,459
Threads: 159
Joined: Feb 2012
Location: Northern England
#2
08-07-2013, 04:49 PM
Very nice
I am sure a job like that will help to get you a place "upstairs"
John
http://www.youtube.com/user/doubleboost
Reply
Thanks given by:
Micktoon Offline
Junior
****
Posts: 638
Threads: 43
Joined: Sep 2012
Location: England
The following 1 user Likes Micktoon's post:
the artfull-codger (08-08-2013)
#3
08-07-2013, 05:19 PM
Top class job WorthyWorthy, they have a nice classy look to them , the fact they worked first time shows you must have filed them spot on, as John says .......must give you a credit for getting a good spot 'upstairs' too
Cheers Mick.
Micktoon, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by: the artfull-codger
dallen Offline
Senior
*****
Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
The following 1 user Likes dallen's post:
the artfull-codger (08-08-2013)
#4
08-07-2013, 05:55 PM
Artful
nice job on the key's your probably right that the first one's were forged with a hammer and the tumble slots were filed by hand. The harder part would be to make the locks that the keys fit.

DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
f350ca Offline
Senior
*****
Posts: 3,002
Threads: 51
Joined: Apr 2012
Location: Ontario
The following 1 user Likes f350ca's post:
the artfull-codger (08-08-2013)
#5
08-07-2013, 06:28 PM
Nice work , as for a place upstairs I figure you go to heaven for the weather and hell for the company.
Free advice is worth exactly what you payed for it.
Greg
Reply
Thanks given by: the artfull-codger
Highpower Offline
JAFO
******
Posts: 4,367
Threads: 177
Joined: Feb 2012
Location: Missouri, USA
The following 2 users Like Highpower's post:
stevec (08-08-2013), the artfull-codger (08-08-2013)
#6
08-07-2013, 08:01 PM
A church key in these parts has a totally different meaning.

[Image: 500px-Churchkey_patent_1996550.jpg]
Willie
Reply
Thanks given by:
EdK Offline
Whipping Boy
*******
Posts: 8,739
Threads: 313
Joined: Feb 2012
Location: Arizona/Minnesota
#7
08-08-2013, 05:27 AM
Smiley-signs009
Reply
Thanks given by: the artfull-codger
Mayhem Offline
purveyor of mischief
******
Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia
The following 1 user Likes Mayhem's post:
the artfull-codger (08-08-2013)
#8
08-08-2013, 06:00 AM
(08-07-2013, 04:49 PM)doubleboost Wrote: ...
I am sure a job like that will help to get you a place "upstairs"...

It should do - he has the keys!
Hunting American dentists since 2015.
Reply
Thanks given by:
the artfull-codger Offline
Sophmore
***
Posts: 184
Threads: 21
Joined: Feb 2013
Location: north yorkshire n.e.england
#9
08-08-2013, 02:32 PM
(08-07-2013, 04:49 PM)doubleboost Wrote: Very nice
I am sure a job like that will help to get you a place "upstairs"
John

Ha ha ha John,well at my age it's getting nearer & nearer,& you've got to keep in with the ''big fella'' upstairs!! but I'll probably be ''down below'' stoking the boilers up rather than ''upstairs'' enjoying beautifull women & champaign!!
Graham.
the artfull-codger, proud to be a member of MetalworkingFun Forum since Feb 2013.
Reply
Thanks given by:
the artfull-codger Offline
Sophmore
***
Posts: 184
Threads: 21
Joined: Feb 2013
Location: north yorkshire n.e.england
#10
08-08-2013, 02:37 PM
(08-07-2013, 08:01 PM)Highpower Wrote: A church key in these parts has a totally different meaning.

[Image: 500px-Churchkey_patent_1996550.jpg]

Now those keys are more usefull Willie, for opening bottles/cans
of grog!!
Graham.
the artfull-codger, proud to be a member of MetalworkingFun Forum since Feb 2013.
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)