08-27-2013, 10:25 AM
damn cheap chinese glue gave up on you did it. Anything in a wood lathe is a projectile looking to happen.
I had a couple of 1.5 X 3 boards about 18 inches long hose clamped together to turn the damn things slipped sideways due to soft wood and whacked me on the side of the head not once but twice before I was smart enough to throw em in the trash.
I'm gluing what you see in the photo to some backers which will be the split line in the pattern. easiest way for me to make it.
I had a couple of 1.5 X 3 boards about 18 inches long hose clamped together to turn the damn things slipped sideways due to soft wood and whacked me on the side of the head not once but twice before I was smart enough to throw em in the trash.
I'm gluing what you see in the photo to some backers which will be the split line in the pattern. easiest way for me to make it.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!