Posts: 28
Threads: 2
Joined: Mar 2013
Location: Somers, WI. USA
Got this for free from a machinist on another forum who advertised it as a horizontal mill. Well it ain't that, but it should be good for some things anyway, and it's free.
turns out it's from parts of two different grinding systems, and the base is really old, which automatically makes it cool in my book. LOL
FrankenGrinder
This is what it looked like originally
Rivett103
Posts: 139
Threads: 14
Joined: Apr 2012
Location: Nelson, BC, Canada
Ooops, bit of difference between a grinder and a mill. Excellent candidate to be cleaned up and put to play. LOL
Walter
starlight_tools, proud to be a member of Metalworking Forum since Apr 2012.
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Nice score Mike, It qualifies for a
in my book.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Come in useful that
DaveH
Posts: 531
Threads: 39
Joined: Jan 2013
Location: Kelowna, BC, Canada
Good score. I'd sure have fun getting something like that up and running.
Oh. And ...
Mike
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.
Posts: 28
Threads: 2
Joined: Mar 2013
Location: Somers, WI. USA
(11-24-2013, 07:34 PM)Hawkeye Wrote: Good score. I'd sure have fun getting something like that up and running.
Oh. And ...
I love fixing old equipment, so yeah, it's fun. I finished disassembling the grinder section last night and discovered that the gib was replaced with a tiny piece of key stock under one screw! Now I'm glad I had to go to the trouble. Now I have to remove all the rust, make a new gib and put it all back together. Oh and find a different motor most likely. The one that came with it is 1/4HP and my manual says it was originally 1/2HP.
