machining wood :) help please

[ieezitin]

Well here are the fruits on my endeavors. I took note of all that replied, and this is what i came up with.











Notes...

I was told too run my milling cutters full out, that was a disaster, i toned it down to 1500RPM with a 3/4 end mill, it shaved wood off not milled. I used a wood router profiling tool to profile the rounded edged at the same speed. The type with a ball bearing on the end, i used the edge reference for the bearing contact. The wood i was milling was Mahogany, its a hard wood, it made my cutters hot but tolerable. Dust was kicking up, i used i vacuum to get rid of all debris.

Hope you all learn.. Anthony.