02-11-2015, 05:42 PM
Id tac it at 1 and 10 both sides then weld the web in. Tac at 6 and weld from 8 back to 6. Probably do both sides. That should stop any twisting and not build in stress. Then wield from 6 to 4 and then the other side. 8 to 9 both sides then top it off now that your practised with the weld that will show from 3 to 1. In this sequence your welding to an outside edge and not building in stress as the weld cools.
Probably better ways but thats how I'd tackle it. And weld hot, don't be afraid of the power bill, use up them watts. if you burn through once in a while your almost hot enough.
Probably better ways but thats how I'd tackle it. And weld hot, don't be afraid of the power bill, use up them watts. if you burn through once in a while your almost hot enough.
Free advice is worth exactly what you payed for it.
Greg
Greg