02-28-2015, 08:04 PM
On a hill here I always roll the low side tire up onto a 2-by laid flat to level the bed. The same thing can be done for both sides to raise it, if need be. I usually work from the high side of the hill and appreciate the relatively lowered deck, as a result -- particularly with big diameter logs.
It looks good. The only thing I would like is the handle closer to the operator. Seems like a stretch off the end like that. But maybe your splitter is shorter than mine, so the distance is the same. Hard to say without actually trying the control position out.
It looks good. The only thing I would like is the handle closer to the operator. Seems like a stretch off the end like that. But maybe your splitter is shorter than mine, so the distance is the same. Hard to say without actually trying the control position out.