My version of the De Haas Chicopee

[JScott]

I found quite a few dimensions that were "off" when I did the CAD drawing and I adjusted them as necessary to make it all fit and work.  AutoCAD has a great feature where you can group several lines together and then make them into what is called a block.  All the major components in my drawing are blocks such as the hammer, trigger, breech lock, etc.  As I built the model in the drawing I put each of the components in a separate part of the drawing as a stand alone detail.  Then when I edited a specific item as a block the changes were automatically updated on the detailed component.  Once I had everything working on the assembly drawing all I had to do was dimension the detail pieces.

I have attached two drawings; one without the dimensions and one with dimensions.  I know that I have over dimensioned the individual pieces but I will go back and clean things up after I build the wooden model and find out what is critical and what is not.

Looking forward to seeing some pics of your build soon!

JScott


  Chicopee CF Rev F-Model2.pdf (Size: 357.26 KB / Downloads: 61)


  Chicopee CF Rev F-Model.pdf (Size: 437.91 KB / Downloads: 53)