Let's See Your Shop

[EdK]

(12-11-2013, 03:43 PM)stevec Wrote: ...
The Xfmrs weigh about 22lbs. each.
They appear to be 220 or 440V step-down to 110V secondary but I'm sure their 110V secondaries were wired in series for 220V input and the 440V primaries were wired in parallel for 440V output.
Surely someone like Ed. could tell us if this is possible.
...

Close Steve. The primary windings are wired in parallel for 220V input or in series for 440V input. The 110V secondary is only for driving the controls and not the motor. But you probably already knew that.

Ed