06-14-2015, 06:08 AM
Since I got the Elliott lathe, I've had to really clear out the section of my shop I want to dedicate to my machines and start again. Since the lathe was delivered, I have been playing around with some of the items to see if I can get them to fit or whether I need to rethink some things.
Today I gave the stock rack a final coat of paint and moved that into position. I had hoped that I could get it to fit to the right of the large brown cupboard but the mill table will hit it. I thought I would try putting it behind the drill press and it may actually work.
The cupboard on wheels may actually go, as I have another of the wooden drawer units that will sit where it currently resides in the photo below. I had originally thought of wheeling this to where I need it but it actually is a little tall and cumbersome to move.
There is actually more room between the lathe and the stock rack than this picture suggests
Today I gave the stock rack a final coat of paint and moved that into position. I had hoped that I could get it to fit to the right of the large brown cupboard but the mill table will hit it. I thought I would try putting it behind the drill press and it may actually work.
The cupboard on wheels may actually go, as I have another of the wooden drawer units that will sit where it currently resides in the photo below. I had originally thought of wheeling this to where I need it but it actually is a little tall and cumbersome to move.
There is actually more room between the lathe and the stock rack than this picture suggests
Hunting American dentists since 2015.