Project Spin Indexer Tailstock
#31
Ed, as we're well familiar with Greg's dealings it'll be no charge to him and you'll pay the shipping. Rotfl
Smiley-eatdrink004
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#32
(08-09-2014, 07:17 PM)f350ca Wrote: It will never work for you Ed, just fire it off to me.
Let me know when you need the address
ermmm, I thought I was first in line Rotfl
Smiley-eatdrink004
DaveH
Reply
Thanks given by:
#33
I suppose it's a bit late to say this Blush but I thought about it a bit and got the combined package, think it saved about £15 over buying them separately. Of course, I've not used the tailstock but it's in a box somewhere if I need it!
Might help someone else who's thinking of getting a spinindexer...

[Image: 1759d706-7b4d-434a-99a5-a33f00fb836e_800x469.jpg]
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#34
I looked for those tail stocks but they don't seem to be available over here.
Reply
Thanks given by:
#35
There's a complete package on eBay at the moment.

http://www.ebay.com/itm/5C-Spin-Index-Fi...4897.l5658
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#36
I don't need the spin indexer as I already have one but I did check ebay a while ago for just the tailstock and came up empty.

Ed
Reply
Thanks given by:
#37
They've got them in Canada, any good?

http://www.accusizetools.ca/products_det...&proid=364

And here. Picture shows the spin indexer but says "tailstock" only in the text.

https://www.huronindustrial.com/workhold...-8-552-003
Arbalest, proud to be a member of MetalworkingFun since Sep 2012.
Reply
Thanks given by:
#38
Had a peek at the Accusizetools link as I hadn't heard of them before. Makes me beam with Canadian pride at their spelling "MATHING TAILSTOCK FOR THE 5C SPIN INDEX". Unless, of course, there is such a thing as a "MATHING TAILSTOCK". Angry
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Reply
Thanks given by:
#39
(08-10-2014, 12:29 PM)Arbalest Wrote: They've got them in Canada, any good?

http://www.accusizetools.ca/products_det...&proid=364

And here. Picture shows the spin indexer but says "tailstock" only in the text.

https://www.huronindustrial.com/workhold...-8-552-003

I may have gone with that second one if I had seen it back when I was looking. Thanks for the links but I think I'll continue on with my project. Those links might help somebody in the future though.

Ed
Reply
Thanks given by:
#40
I got some work done on this project this week. I finished the arbor. I started out with what you see in the first picture. I bought two of those off of ebay eons ago for dirt cheap. They have an MT-2 taper. At the time I bought them, I had intended to use one in an indexer project, that's why I bought them.

Check out the cool chatter pattern on that puppy. Smile
I used the Nikcole Mini System to cut the groove. It cut it like butter.

Next step is to get back to the main body now that I've got a diameter for the arbor that I can measure.

Ed

   

       

   
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)