12-16-2014, 11:35 PM
the FM50 I a Teco, to start the 5 HP motor with a VFD for 3 HP you may have to ramp the start so that instead of it throwing all the starting voltage at the motor it will ramp up the load and not overload the VFD.
Should run fine as long as you don't put more then a 3 HP load on the Drive
DA
Should run fine as long as you don't put more then a 3 HP load on the Drive
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!