Leveling?

[DaveH]

Hi Wong,

The holes from the manual

Quote:Installation and setting up:
Note:
The machine must mot be lifted by the gearbox 23 (Fig. 1) or
by the cover cap of the motor when transporting. The plastic
caps could break.
The supporting surface must be flat and sufficiently strong to
absorb the vibration generated during work. The machine
must be fastened to the surface using the holes 12 (Fig. 1)
provided for this purpose.

I assume the rubber feet you mentioned are those that have adhesive on one side to stick to the bottom of the flat surface? yes that is correct


DaveH