04-07-2015, 11:55 PM
Bend it hot seems to be the way to go, I don't think I have the 'fire power' to get about 6" of it red hot. I can do small silver solder jobs and that's about it. I could try doing it a bit at a time - works with mild steel that I do know I've done it. Whether it works with stainless I have no idea - to me it seems it should but there again I thought 3mm thick stainless would be easy to scroll 
so my thoughts are pretty useless. 
I'm going to try the press see how that goes no heat, cold, it will either work or it won't
The way Darren suggested works well with mild steel, normally it takes two one to hold and bend the bar whilst the other uses the torch.
DaveH
so my thoughts are pretty useless. I'm going to try the press see how that goes no heat, cold, it will either work or it won't
The way Darren suggested works well with mild steel, normally it takes two one to hold and bend the bar whilst the other uses the torch.
DaveH