5 Cylinder Radial
#91
Hi Ed
Movie maker was the first editor I used and I agree it is easy. But because I am using a adventure type camera similar to a Go Pro I have to be able to crop and zoom and movie maker has not that facility.
May be if I ever stop having to get material and tools to build things a better camera may be in order but that seems a long way off.

Happy Xmas Brian
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by: EdK
#92
(12-23-2015, 02:45 PM)Brian Wrote: I have no one to discuss things with. unless you pick olives you are out of the loop.
Brian.

Rotfl  Rotfl   Rotfl
Smiley-eatdrink004
DaveH
 a child of the 60's and 50's and a bit of the 40's Smile
Reply
Thanks given by:
#93
At last all ten cam followers finished. the next nail bighting bit will be the valve cages but the bronze is not due untill late January
so I have time to ponder the problem of shrink fitting the parts then final machining. 
has anyone used plumbers freezing spray and how effective is it. In my young day's we had dry ice and tricoetheline now that got things really cold . Yikes

Brian. Smiley-dancenana

   
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#94
Nice work Brian. It's coming along nicely. Thumbsup

Ed
Reply
Thanks given by:
#95
It's how far you can get from ambient that matters and unless you have access to liquid nitrogen, it's almost always more effective to heat one part than cool the other. Exceptions might be if one part might be damaged by heat or if the one to be cooled has a higher coefficient of linear thermal expansion.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#96
Hi Tom I was thinking of doing both. heating the head on a electric boiling ring that I have used in the past for fitting bearings. and cooling the valve cage using plumbers spray.
Brian.
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#97
Return to the mill to cut the cooling fins.
   
 

Its starting to look like a lot of work !!
   
Onwards and upwards.   Brian Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
#98
Nice work Brian. You're moving along with the project quite nicely.

Ed
Reply
Thanks given by:
#99
After digging out the mill from under all the chips the next job is to mill the flat to take the inlet flange.

   

   

One down four to go.
Brian. Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:
Exhaust flange mounts done, and five views of the main work area's.
So far the 357 gram blank has been reduced to 208 gram, with more to go.
     

      

Brian.  Smiley-dancenana
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com Welcome
Reply
Thanks given by:




Users browsing this thread: 2 Guest(s)