05-20-2016, 11:28 AM
After the cams come the cam boxes.
First job was to part off the material to length an drill and bore the inside dimensions.
Then make the end caps.
Ready to do the outside.
At this point I decided that a change of tooling may speed up the job so I changed to the fly cutter fitted with a indexable tool from the lathe.
Very happy with the results.
Brian.
First job was to part off the material to length an drill and bore the inside dimensions.
Then make the end caps.
Ready to do the outside.
At this point I decided that a change of tooling may speed up the job so I changed to the fly cutter fitted with a indexable tool from the lathe.
Very happy with the results.
Brian.
