05-29-2015, 06:24 PM
(05-29-2015, 06:11 PM)PixMan Wrote: Sorry David, but I don't have any screws for those drills and inserts that go in them. From the catalog I have that the proper screw was a Valenite part number PT487T, which is an M2.5x0.45, 0.170" length of thread under the head, head diameter Ø0.130", 52º included angle, 0.270" overall length, Torx T-7 socket.
Hope that helps.
Ken
knowing the screw diameter I can get something that will fit thru the hole, seeing as how I can't push them at the feeds and speeds that they should be worked at I think I can come up with something.
May be able to take one of my old 3/8 inch tpg holders and do some modifying and get something that will work.
Thanks, next time I'll ask before I put out the cash. I bought a 8 inch chuck one time that is totally useless to me as it fits some cnc machine with a bar feeder or some thing like that on it, takes a hydraulic or pneumatic closure, nice chuck too cost about 1400.00 dollars I got it for 125.00 brand spanking new.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!