06-06-2015, 07:00 PM
Mine is built with the same style channel measuring about 6.5mm on the thin part and 14mm on the thick. 5mm thick. I have a 21" span. Mine is not home made so it has an actual rating of 25 tons. The pins that hold the movable table are 3/4" 1018. Hope that helps some.
Edit: One difference between your drawing and my press is the way the channel is pointing. Flat sides are to the inside. not out.
Edit: One difference between your drawing and my press is the way the channel is pointing. Flat sides are to the inside. not out.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
the nobucks boutique etsy shop | the nobucks boutique