06-26-2015, 02:18 PM
Jason,
Anything is possible (except my welding ).
The material of the tool bit needs to be considered - if it has carbon in it (most steels), it is not a good idea to use a diamond disc.
If the bit is (say) tungsten carbide then a diamond disc will be fine.
DaveH
Anything is possible (except my welding ).
The material of the tool bit needs to be considered - if it has carbon in it (most steels), it is not a good idea to use a diamond disc.
If the bit is (say) tungsten carbide then a diamond disc will be fine.
DaveH