10-06-2015, 12:20 PM
Correction what I meant by front side was the cross feed furthest towards the operator . As I shimmed the gib .004 on the wider side of gib on the non sliding side next to the gib adjusting screw . Well prob is fixed no longer needed .
SEE NEXT POST " Blue tells the story"
****** New cross feed nut is installed gib is adjusted perfectly and crosslide works smooth with full range. ****
ps if ya want pics ya gona hafta wait ...
SEE NEXT POST " Blue tells the story"
****** New cross feed nut is installed gib is adjusted perfectly and crosslide works smooth with full range. ****
ps if ya want pics ya gona hafta wait ...