12-24-2015, 11:14 AM
I added 1/2 inch thick plates under the angle iron feet, then bolted Footmaster Casters to the plates, making sure that at least two of the bolts went through the angle irons. As the floor was un-even, I added a hockey puck under at least one caster.
Rolled into position then levelled! I have had no problems with even thinking of tipping and this is a 50 Ton with the hydraulic power pack mounted on the top.
Walter
Rolled into position then levelled! I have had no problems with even thinking of tipping and this is a 50 Ton with the hydraulic power pack mounted on the top.
Walter
starlight_tools, proud to be a member of Metalworking Forum since Apr 2012.