12-15-2015, 12:02 PM
After wiring, we made a test run and the press worked great.
Using one of the Unipunches that came with the press, we punched 1/2 holes in
16 gauge with no problems at all.
Next, I want to build a guard around the contact point where the punch hits the unipunch.
(Leaving no open contact point)
Using one of the Unipunches that came with the press, we punched 1/2 holes in
16 gauge with no problems at all.
Next, I want to build a guard around the contact point where the punch hits the unipunch.
(Leaving no open contact point)
Heavy Metal Illness