12-28-2015, 05:09 AM
I got a local fabrication shop to make all the cleats for the mezzanine, figured it made sense to get them done on a punch and shear rather than drill all the holes. I should have told them not to linish the corners and debur, would have saved a fair bit of labor cost I think. These were the most expensive part of the project.
Welded the cleats onto the shed posts to hang the main beams
The other cleats were a darn sight easier, done at ground level with the weld horizontal
Had a bit of help painting all the welds
Welded the cleats onto the shed posts to hang the main beams
The other cleats were a darn sight easier, done at ground level with the weld horizontal
Had a bit of help painting all the welds
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Milling Machine (n); a machine tool used in the production of lathe components.