01-07-2016, 03:18 AM
Rob,
If it's failing a PAT test it's worth pulling the lot out of the oil for an inspection. I've heard tell of the transformer oil having water below it after a few decades use. Mine is very similar to yours and it's just a case of undoing the four top screws and lifting on the handles with a block and tackle.
If it's failing a PAT test it's worth pulling the lot out of the oil for an inspection. I've heard tell of the transformer oil having water below it after a few decades use. Mine is very similar to yours and it's just a case of undoing the four top screws and lifting on the handles with a block and tackle.
Andrew Mawson, proud to be a member of MetalworkingFun Forum since Oct 2013.