06-01-2012, 02:40 AM
Hi Wong
If your griping the screw by the thread to shorten it ,use a split nut,make a saw cut through one of the flats on the nut ,then screw in screw,then grip nut in chuck have saw cut beteween two jaws, the saw cut will alow the nut too close up gripping the threads tight.
Message sent using phone. Really hard to use lol
Rob.
If your griping the screw by the thread to shorten it ,use a split nut,make a saw cut through one of the flats on the nut ,then screw in screw,then grip nut in chuck have saw cut beteween two jaws, the saw cut will alow the nut too close up gripping the threads tight.
Message sent using phone. Really hard to use lol
Rob.