Help me buy a QCTP

[arvidj]

I never installed or used the tool post so my memory of the details were a little cloudy.

The good news ... I finally posted the pictures ...

The bad news ... it is a piston, not a wedge tool post ... the heavy duty boring bar holder does not go down on one side of the tool post [gets caught on the piston] ... and it is heavy so shipping to Australia could be expensive.

Anyway ... it is the "standard starter set", the tool post, a parting blade holder, Knurler, boring bar holder, heavy duty boring bar holder and turning and facing tool holder.

   

   

The discoloration on the tool post seems to wipe off. The tool post has never been mounted or used so it appears to be the protective grease that has discolored.

   

And here is the "strangeness" of the heavy duty boring bar holder. All the other holders fit without any issues so I am assuming that a little cleanup with a file will make this one fit both sides. I don't have a need for the tool post so have not bothered to try to resolve the issue.

   

   

PM me if you ... or anyone else for that matter ... is interested.