South Bend 9 rebuild question
#1
I am rebuilding a SB9 and so far it is going well. I removed and ordered a replacement name plate showing the change gear ratios. Where do I get new screw shank rivets that hold the plate on the gear change box?

Any advice would be appreciated.

John
Reply
Thanks given by:
#2
Depending on size, I know Logan carries them for their lathes. The site is lathes.com but I imagine you can get them thru places like Grainger, Fastenal, McMasters-Carr, ...
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop  |  the nobucks boutique
Reply
Thanks given by:
#3
what diameter cause I may be able to drop you some in the mail,

I've got a couple different sizes of drive rivets 3/32 and 1/8 I think, I would have to look to be sure of the size.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.

If life seems normal, your not going fast enough! Tongue
Reply
Thanks given by:
#4
I got mine form McMaster-Carr. They may have passed through the MA shipping house that I used thoug,....
Hunting American dentists since 2015.
Reply
Thanks given by:
#5
(06-04-2016, 08:26 AM)Mayhem Wrote: I got mine form McMaster-Carr.  They may have passed through the MA shipping house that I used thoug,....

Dyslexics untie!!! Big Grin

McMaster-Carr drive screws
Willie
Reply
Thanks given by:
#6
Thanks everyone for your help.  I am familiar with McMaster-Carr but would have never thought of "drive screws" .

John
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)