09-30-2014, 09:34 AM
I really need to stop telling my friends that I am heading OS! Most of the purchases I have sitting in Ken's house are for my mate who's lathe and QCTP were the basis of this thread.
Now another friend is interested in getting a QCTP for his lathe. He has the local equivalent of a Grizzly G4015Z combo lathe/mill and he is interested in getting a QCTP. I measured the distance from the top of the compound slide/vise to the centre line and it is only a smidgen over 2" The manual specifies the swing at 16.5" over the bed and 11.5" over the saddle.
I'd be interested to hear if anyone here has the same (or similar) combo lathe/mill and whether or not they have fitted a QCTP.
Now another friend is interested in getting a QCTP for his lathe. He has the local equivalent of a Grizzly G4015Z combo lathe/mill and he is interested in getting a QCTP. I measured the distance from the top of the compound slide/vise to the centre line and it is only a smidgen over 2" The manual specifies the swing at 16.5" over the bed and 11.5" over the saddle.
I'd be interested to hear if anyone here has the same (or similar) combo lathe/mill and whether or not they have fitted a QCTP.
Hunting American dentists since 2015.