05-10-2012, 09:19 AM
Hi Henry and Ed 
Thank you for the wonderful description that you make to solve the mill head leaks. The most milling machines type 45 have the same problem. This description will be very usefull and good manual for many users of a 45 mill to solve the leak problem.
In one of the articles I read that "the seals around the shaft that drives the spindle were installed upside down with the lip pointing away from the oil filled head." Because this error is probably not at all the machines I would like to ask whether it is possible to make a picture to show how the seals must be placed correctly.
Heve a nice day
Gerard
Thank you for the wonderful description that you make to solve the mill head leaks. The most milling machines type 45 have the same problem. This description will be very usefull and good manual for many users of a 45 mill to solve the leak problem.
In one of the articles I read that "the seals around the shaft that drives the spindle were installed upside down with the lip pointing away from the oil filled head." Because this error is probably not at all the machines I would like to ask whether it is possible to make a picture to show how the seals must be placed correctly.
Heve a nice day
Gerard