05-10-2012, 06:54 AM
Hi Ed,
Even one of those cheap cranes they sell for around $180 for trucks would do mounted to a pole. Or if you have a engine crane dual purpose it onto a pole. It can always be changed back with only 2 bolts.
Mounting the vise with the crane makes it so easy, I lift it up over my head where I can then check the under side for any rubbish and oil it up before putting it on the mill. With my neck problem it save bending.
Dave
Even one of those cheap cranes they sell for around $180 for trucks would do mounted to a pole. Or if you have a engine crane dual purpose it onto a pole. It can always be changed back with only 2 bolts.
Mounting the vise with the crane makes it so easy, I lift it up over my head where I can then check the under side for any rubbish and oil it up before putting it on the mill. With my neck problem it save bending.
Dave