Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
This week I advance several tech levels, The mig welder works, the wheelhorse gets started again, and I finally get my tap plumbed in by the front door, and fix a pressure washer! Enjoy! I did!! like, subscribe and make nice positive comments...........or not
Phil
Sunny and hot in East Yorkshire!
https://youtu.be/DB6llBtRnyI
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
This week I rebuild the wire feed tensioner on the Socome mig welder, and fit the Eurotorch conversion kit I got from Techarc. Unfortunately the bearings which I need for it did not come till late Friday, so I will be fitting them and testing the welder next week. It worked out very well! please subscribe, like, comment and enjoy!
Phil. Very hot in East Yorkshire!
https://youtu.be/5-ApnzN68cg
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
This week I finish the wire feed, test the welder, remove, repair and refit the lid, discover a problem on the Colchester, and we are nearly ready for paint! I bought a MT3 test bar from RDG, which came Friday, no casters yet, but I hope they will come over the weekend, Like, comment, and please subscribe, but above all, enjoy it as much as I enjoyed making it!
Phil, Steamy and damp East Yorkshire!
https://youtu.be/k2tsJGcyRPw
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
This week I get the welder on its roof, remove several hundredweight of metal and three huge cast wheels, and fit some new swivel castors, and a new bottle shelf, several late starts this week, but by Friday, it was back on its new wheels! Enjoy, like subscribe, comment, but above all wear a mask and stay safe!
Phil, East Yorkshire in the Monsoon!
https://youtu.be/54_5qk2Ax04
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
HI All,
This week Workshop becomes paintshop as I spray the welder and the Jones and Shipmaqn bench centres, and I get them both finished, and check out the RDG lathe test bar Enjou. like and subscribe! it has been a good week, on Wednesday I thought it was Tuesday, and I spent most of Thursday dozing in the Car park at HRI while Cath had a chest Xray and tests before getting the all clear! Life gpes on!
Phil, Dripping East Yorkshire
https://youtu.be/YkAIZWtfNM8
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
Hi all,
This week I get the test bar into the colchester lathe to check the headstock alignment, and also check the Covmac lathe. Some finishing off on the Socome welder, and then onto the Toro wheelhors tractor to continue the new transmission set up, , Friday afternoon, went to help Keith do a tip run and didn't get home till 8-00, hence this video being uploaded on Saturday! I'll explain the disaster next week!
Phil, Scorching East Yorkshire!
https://youtu.be/RHbXXpY7jTE
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
More work on the Colchester, and vast improvements made to the fit of the bush and test bar into the spindle nose, and this week I start to get to grips with the 2CV engined Toro Wheelhorse, and then PLUNDER! HA HARR!Got a tip off about some gear that was available, and got it fer next to nowt! Don't forget to like, comment and subscribe to my channel, and I thank you all for watching my antics!
Phil, Mutch Dripping on the Wolds'
East Yorkshire.
https://youtu.be/q9hHtcQbZnY
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
More work on the Wheelhorse, a slight setback with a wobbly shaft, but nothing a man with two lathes and no idea can't fix! And then!! disaster, I did a covid 19 test on Monday, and got a text Wednesday Morning to say That Catherine was negative, and mine was positive! Like it was telling me something I didnt already know, although given that my life is one of self isolation in the workshop so what?, well, now I can't go for seven days, by which time the government deems me to be recovered, or at least, not infectious, but the rest of the household has to lock down for 14 days! We live in interesting times!
Phil,
East Yorkshire Monsoon season has begun!
https://youtu.be/wo_yHhM2-rw
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
Monday was the last day of my 7 day lockdown after my positive covid test, so I was back in the shop Tuesday, suffering from day confusion, a known sympton of disturbed routine! 4 days on the tractor, and a good amount of progress. I always think that it its best to tackle the hardest part of any project first, and this week the starter was started, a puzzling problem was overcome, and the starter was finished.
Phil, Mutch Swettin on the Wolds
East Yorkshire
https://youtu.be/LwHv4m0KYAI
Posts: 308
Threads: 10
Joined: Nov 2012
Location: East Yorkshire
Lots of disturbances this week, and call outs to other jobs, I must think on and video some of them! Toro tractor moves forward apace....til Friday, when I discover an accumulation of minor disasters, but we shall overcome! Mustn't say too much as shearing the bolt off was entirely my fault, I used heat on the second one and it came free without incident, I was trying to take a short cut because I couldnt get the screws out which hold the rubber shrouds round the engine and therefore couldn't use heat or they would melt... short cuts often lead to the place I now find myself in!! Onward, and hopefully upward! Despite all these setbacks, I am still not considering a career in Accountancy!
Phil, Sunshine and showers, very very heavy showers!
East Yorkshire
https://youtu.be/HzBfOErg_8Q
|
