Help needed re Chinese lathe saddle adjustment
#11
Something you may want to try to get it serviceable. If you blue the ways and run the saddle down until it binds up, you should be able to see where the blue is rubbed off. If you then scrape those spots, it should travel a bit farther next time. I doubt the saddle has any wear on it, so essentially you would be using it as your reference to straighten out the ways.

Tom
[Image: TomsTechLogo-Profile.png]
Reply
Thanks given by:
#12
(08-25-2020, 01:00 PM)TomG Wrote: Something you may want to try to get it serviceable. If you blue the ways and run the saddle down until it binds up, you should be able to see where the blue is rubbed off. If you then scrape those spots, it should travel a bit farther next time. I doubt the saddle has any wear on it, so essentially you would be using it as your reference to straighten out the ways.

Tom

Cheers TomG! Thumbsup will have to do this if I can actually find the time! Rotfl

Used to use (years ago) a broken power hacksaw blade as a cheap scraper......worked remarkably well.

ATB.

Roy.
Light travels faster than sound!
This is why some people appear bright until they open their mouth!
Preserve nature...…….Pickle a squirrel! 
Reply
Thanks given by:




Users browsing this thread: 1 Guest(s)