|
Spindle adapter for drill press
|
01-11-2022, 10:48 AM
I did some measuring and it turns out the spindle taper is a "short" version of MT2 that is designated B16. I found several adapters on eBay that go from B16 to ER collet. I'll probably go to an ER-25. You can get collet sets that go from 1/8 to 5/8 inch or 1 to 16 millimeter.
JScott, proud to be a member of MetalworkingFun Forum since Mar 2014.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Spindle adapter for drill press - by JScott - 12-28-2021, 06:50 PM
RE: Spindle adapter for drill press - by vtsteam - 01-10-2022, 11:26 AM
RE: Spindle adapter for drill press - by JScott - 01-11-2022, 10:48 AM
RE: Spindle adapter for drill press - by vtsteam - 01-11-2022, 11:32 AM
RE: Spindle adapter for drill press - by vtsteam - 01-12-2022, 09:22 AM
RE: Spindle adapter for drill press - by JScott - 11-01-2022, 11:07 AM
|
