07-08-2012, 07:42 PM
Wong,
The fact the bench top is made up of two spaced 15mm ply doesn't mean you cannot bolt through it.
Make sure the feet have a large diameter foot to help spread the load. A large (slightly larger than the mill base) 5mm thick piece of steel placed between the feet and the bench top will help to distribute the load. Aluminium would probably do.
DaveH
The fact the bench top is made up of two spaced 15mm ply doesn't mean you cannot bolt through it.
Make sure the feet have a large diameter foot to help spread the load. A large (slightly larger than the mill base) 5mm thick piece of steel placed between the feet and the bench top will help to distribute the load. Aluminium would probably do.
DaveH