I'm glad you had success Greg, just sayin' , don't get yer hopes up if you snap a # 6, #8 or even #10.
I have had success using a couple or three nuts of the right size and three pieces of piano wire down the flutes of the broken part and up into the remaining tap. But this was only to impress underlings and further my mastery mystique.
I have had success using a couple or three nuts of the right size and three pieces of piano wire down the flutes of the broken part and up into the remaining tap. But this was only to impress underlings and further my mastery mystique.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.