11-29-2012, 07:35 AM
Hi all
made a start on the escapement for the new clock today.
I am limiting myself to using only the 7x12 with the parts that came in the box.--- A simple bench drill.---A dremmel type mini drill.-- and the normal hand tool found in a small shop.
All other tooling will be made .spending as little cash as possible.
The clock will use as little brass as possible to keep cost low.
This I hope will be the start of a plans book to enable those new the hobby to make something without spending lots of green crinkly stuff.
Brian
made a start on the escapement for the new clock today.
I am limiting myself to using only the 7x12 with the parts that came in the box.--- A simple bench drill.---A dremmel type mini drill.-- and the normal hand tool found in a small shop.
All other tooling will be made .spending as little cash as possible.
The clock will use as little brass as possible to keep cost low.
This I hope will be the start of a plans book to enable those new the hobby to make something without spending lots of green crinkly stuff.
Brian
Brian, proud to be a member of MetalworkingFun since Sep 2012.
http://briansworkshop.weebly.com
http://briansworkshop.weebly.com